F065
Dijametru Nominali tal-Pajp ta' Barra:
- Rakkomandat mill-Istandard tal-Intrapriża ta' HL Cryogenic Equipment. Jista' wkoll jiġi prodott skont il-ħtieġa tal-klijent.
- Pressjoni tad-Disinn:
- Rakkomandat ≤ 16 bar. Jew agħżel it-Tip ta' Konnessjoni Iwweldjata (≤40 bar).
- Materjal tal-Pajp ta' Barra
Mingħajr rekwiżit speċjali, il-materjal tal-pajp ta' ġewwa u l-pajp ta' barra se jintgħażel l-istess.
3.1.3 Tip ta' Konnessjoni Iwweldjata
mudell
Konnessjoni
Tip
Dijametru Nominali tal-Pajp ta' Ġewwa
Pressjoni tad-Disinn
Materjal
tal-Pajp ta' Ġewwa
Standard
Rimarka
W010
00X
Tip ta' Konnessjoni Iwweldjata għal Pajp Flessibbli Insulat bil-Vakwu Statiku
DN10, 3/8"
8~40 bar
Azzar Inossidabbli tas-Serje 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Dijametru Nominali tal-Pajp ta' Barra: | |
| Pressjoni tad-Disinn | Materjal tal-Pajp ta' Ġewwa. | A hija 304, | DN40, 1-1/2" | Ċ huwa 316, |
| D huwa 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Pressjoni tad-Disinn |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Rakkomandat ≤ DN25 jew 1". Jew jagħżel it-Tip ta' Konnessjoni tal-Bayonet tal-Vakwu bi Flanġijiet u Boltijiet (minn DN10, 3/8" sa DN80, 3"), Tip ta' Konnessjoni Iwweldjata (minn DN10, 3/8" sa DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Standard | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Dijametru Nominali tal-Pajp ta' Barra: |
| Rakkomandat mill-Istandard tal-Intrapriża ta' HL Cryogenic Equipment. Jista' wkoll jiġi prodott skont il-ħtieġa tal-klijent. | Materjal tal-Pajp ta' Barra | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Tip | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Standard | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Pressjoni tad-Disinn. | / | DN25, 1" | DN25, 1" | / | |
| Materjal tal-Pajp ta' Ġewwa. | / | DN25, 1" | DN25, 1" | / | |
| Ċ huwa 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Dijametru Nominali tal-Pajp ta' Ġewwa:
| Rakkomandat ≤ DN25 jew 1". Jew jagħżel it-Tip ta' Konnessjoni tal-Bayonet tal-Vakwu bi Flanġijiet u Boltijiet (minn DN10, 3/8" sa DN80, 3"), Tip ta' Konnessjoni Iwweldjata (minn DN10, 3/8" sa DN150, 6") | Dijametru Nominali tal-Pajp ta' Barra: |
| Rakkomandat mill-Istandard tal-Intrapriża ta' HL Cryogenic Equipment. Jista' wkoll jiġi prodott skont il-ħtieġa tal-klijent. | Pressjoni tad-Disinn: |
| Rakkomandat ≤ 16 bar. Jew jagħżel it-Tip ta' Konnessjoni Iwweldjata (≤40 bar) | Materjal tal-Pajp ta' BarraMingħajr rekwiżit speċjali, il-materjal tal-pajp ta' ġewwa u l-pajp ta' barra se jintgħażel l-istess.3.2 Sistema ta' Pajpijiet Insulati bil-Vakwu Dinamika3/S |
| 3.2.1 Tip ta' Konnessjoni tal-Bajjunetta tal-Vakwu bil-Klamps | mudell |
| Konnessjoni | Tip |
| Dijametru Nominali tal-Pajp ta' Ġewwa | Pressjoni tad-Disinn |
| Materjal | tal-Pajp ta' Ġewwa |
| Standard | Rimarka |
HDB01008
Tip ta' Konnessjoni tal-Bajjunetta tal-Vakwu bi Klampi għal Pajp Flessibbli Insulat bil-Vakwu Dinamiku
lDN10, 3/8"
l8 bars
| Azzar Inossidabbli tas-Serje 300 Ċ huwa 316, | Materjal tal-Pajp ta' Ġewwa. | |
| A hija 304, | B huwa 304L,Ċ huwa 316,D huwa 316L, | |
| E hija oħra. | HLH | DB01508 |
| DN15, 1/2" | Pressjoni tad-Disinn: | Pressjoni tad-Disinn: |
| DN20, 3/4" | Pressjoni tad-Disinn: | Pressjoni tad-Disinn: |
| DN25, 1" | Pressjoni tad-Disinn: | Pressjoni tad-Disinn: |
| Dijametru Nominali tal-Pajp ta' Barra: | Pressjoni tad-Disinn: | Pressjoni tad-Disinn: |
Rakkomandat ≤ 8 bar. Jew jagħżel it-Tip ta' Konnessjoni tal-Bajonetta tal-Vakwu bi Flanġijiet u Boltijiet (≤16 bar), Tip ta' Konnessjoni Iwweldjata (≤40 bar)Materjal tal-Pajp ta' BarraMingħajr rekwiżit speċjali, il-materjal tal-pajp ta' ġewwa u l-pajp ta' barra se jintgħażel l-istess.
Kundizzjoni tal-Enerġija:
HL-HX-X-Is-sit jeħtieġ li jipprovdi l-enerġija lill-pompi tal-vakwu u jinforma lil HL Cryogenic Equipment bl-informazzjoni lokali dwar l-elettriku (Vultaġġ u Hertz).-00-X
3.2.2 Tip ta' Konnessjoni ta' Bajonetta tal-Vakwu bi Flanġijiet u Boltijiet
mudell
Konnessjoni
Tip
Dijametru Nominali tal-Pajp ta' Ġewwa
Pressjoni tad-Disinn
Materjal
tal-Pajp ta' Ġewwa
Standard
Rimarka
Nominal Diameter of Inner Pipe
00X
8~16-il bar
DN10, 3/8"
8~16-il bar
Azzar Inossidabbli tas-Serje 300
Design Pressure
Pressjoni tad-Disinn.
08 huwa 8bar,
16 huwa 16-il bar.
Materjal tal-Pajp ta' Ġewwa.
A hija 304,
B huwa 304L,
Ċ huwa 316,
D huwa 316L,
E hija oħra.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Serje ta' Separaturi tal-Fażi Insulati bil-Vakwu | DN10, 3/8" | Armenjan
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FranċiżDijametru Nominali tal-Pajp ta' Barra:X | DN15, 1/2" | |||||
| FranċiżRakkomandat ≤ 16 bar. Jew agħżel it-Tip ta' Konnessjoni Iwweldjata (≤40 bar).X | DN20, 3/4" | |||||
| FranċiżKundizzjoni tal-Enerġija:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Iżlandiż
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Franċiż08 huwa 8bar,00X | u 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FranċiżSamoan00X | DN15, 1/2" | |||||
| FranċiżSindhi00X | DN20, 3/4" | |||||
| FranċiżTaġik00X | DN25, 1" | |||||
| FranċiżTajlandiż00X | DN32, 1-1/4" | |||||
| FranċiżUżbek00X | DN40, 1-1/2" | |||||
| FranċiżXhosa00X | DN50, 2" | |||||
| FranċiżŻulu00X | DN65, 2-1/2" | |||||
| FranċiżOrija00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Kundizzjoni tal-Enerġija:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Azzar Inossidabbli tas-Serje 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FranċiżDN15, 1/2"00X | DN15, 1/2" | |||||
| FranċiżDN20, 3/4"00X | DN20, 3/4" | |||||
| FranċiżDN25, 1"00X | DN25, 1" | |||||
| FranċiżW03200X | DN32, 1-1/4" | |||||
| FranċiżW04000X | DN40, 1-1/2" | |||||
| FranċiżW05000X | DN50, 2" | |||||
| FranċiżW06500X | DN65, 2-1/2" | |||||
| FranċiżW08000X | DN80, 3" | |||||
| HPajp tal-Ġakketta tal-Vakwu00X | DN100, 4" | |||||
| HValv li Jirregola l-Fluss tal-Ossiġnu Likwidu taċ-Ċina00X | DN125, 5" | |||||
| HPrezz bl-ingrossa Ċina Ċina ISO Standard Tank 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSSistema Dinamika tal-Pompa tal-Vakwu00X | Serje ta' Separaturi tal-Fażi Insulati bil-Vakwu | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FranċiżWhatsapp00X | DN15, 1/2" | |||||
| FranċiżWeChat00X | DN20, 3/4" | |||||
| FranċiżĠermaniż00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Grieg
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Daniż
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armenjan
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstonjanX | DN15, 1/2" | |||||
| HLHFriżjanX | DN20, 3/4" | |||||
| HLHGuġaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Iżlandiż
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalajalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoan00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTaġik00X | DN25, 1" | |||||
| HLHDTajlandiż00X | DN32, 1-1/4" | |||||
| HLHDUżbek00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDŻulu00X | DN65, 2-1/2" | |||||
| HLHDOrija00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
